免責聲明: 本站彙整 FDA、ClinicalTrials.gov、PubMed、SEC EDGAR 等官方公開資料,僅供一般參考,不構成醫療建議、診斷、治療建議或投資建議。

FDA 510(k)

內科手術對齊系統;CONTOUR3D 弯曲系統

K 號:K253216 · 2026-06-25

決定日期2026-06-25
產品代碼SIN
諮詢委員會或
決定相當於

器材摘要

IntraOp Alignment System; CONTOUR3D Bending System is the device name listed in this FDA 510(k) record. The listed applicant is Alphatec Spine, Inc.. It received FDA 510(k) clearance on 2026-06-25 under 510(k) number K253216. The device is classified under product code SIN. It was reviewed by the OR advisory panel. FDA Decision: Substantially Equivalent.

常見問題

What is the IntraOp Alignment System; CONTOUR3D Bending System?

IntraOp Alignment System; CONTOUR3D Bending System is a medical device that received FDA 510(k) clearance on 2026-06-25. The listed applicant is Alphatec Spine, Inc.. The 510(k) number is K253216.

When did IntraOp Alignment System; CONTOUR3D Bending System receive FDA 510(k) clearance?

IntraOp Alignment System; CONTOUR3D Bending System received FDA 510(k) clearance on 2026-06-25, under 510(k) number K253216.

Who is the listed applicant for IntraOp Alignment System; CONTOUR3D Bending System?

FDA 510(k) 記錄將 Alphatec Spine, Inc. 列為申請人。這並不單獨確立設備製造商。

What is the FDA product code for IntraOp Alignment System; CONTOUR3D Bending System?

The FDA product code for IntraOp Alignment System; CONTOUR3D Bending System is SIN.

相關臨床試驗

相關紀錄係使用名稱、產品代碼或其他後設資料自動配對。配對結果並不構成已驗證的臨床、科學、企業或監管關係,請查閱連結的官方來源。

其他以 Alphatec Spine, Inc. 為申請人之記錄

相關紀錄係使用名稱、產品代碼或其他後設資料自動配對。配對結果並不構成已驗證的臨床、科學、企業或監管關係,請查閱連結的官方來源。

查看所有 61 項裝置 →

官方來源

在 FDA 資料庫中查看 →

資料來源為 FDA Open API。如需最新且權威的資訊,請始終參閱官方記錄。

↑