免責聲明: 本站彙整 FDA、ClinicalTrials.gov、PubMed、SEC EDGAR 等官方公開資料，僅供一般參考，不構成醫療建議、診斷、治療建議或投資建議。

FDA 510(k)

Additive Orthopaedics Patient Specific 3D Printed Bone Segments

K 號：K180239 · 2018-05-16

申請人Additive Orthopaedics, LLC
決定日期2018-05-16
產品代碼HRS
諮詢委員會或
決定相當於

器材摘要

Additive Orthopaedics Patient Specific 3D Printed Bone Segments is the device name listed in this FDA 510(k) record. The listed applicant is Additive Orthopaedics, LLC. It received FDA 510(k) clearance on 2018-05-16 under 510(k) number K180239. The device is classified under product code HRS. It was reviewed by the OR advisory panel. FDA Decision: Substantially Equivalent.

常見問題

What is the Additive Orthopaedics Patient Specific 3D Printed Bone Segments?

Additive Orthopaedics Patient Specific 3D Printed Bone Segments is a medical device that received FDA 510(k) clearance on 2018-05-16. The listed applicant is Additive Orthopaedics, LLC. The 510(k) number is K180239.

When did Additive Orthopaedics Patient Specific 3D Printed Bone Segments receive FDA 510(k) clearance?

Additive Orthopaedics Patient Specific 3D Printed Bone Segments received FDA 510(k) clearance on 2018-05-16, under 510(k) number K180239.

Who is the listed applicant for Additive Orthopaedics Patient Specific 3D Printed Bone Segments?

The FDA 510(k) record lists Additive Orthopaedics, LLC as the applicant. This does not by itself establish the device manufacturer.

What is the FDA product code for Additive Orthopaedics Patient Specific 3D Printed Bone Segments?

The FDA product code for Additive Orthopaedics Patient Specific 3D Printed Bone Segments is HRS.

相關臨床試驗

相關紀錄係使用名稱、產品代碼或其他後設資料自動配對。配對結果並不構成已驗證的臨床、科學、企業或監管關係，請查閱連結的官方來源。

NCT07608549FLASH 預試階段 1 安全性研究NOT_YET_RECRUITINGNCT06562205PAP系統外部臨床研究（ECS）NOT_YET_RECRUITINGNCT06443177對於動脈瘤性硬腦膜下出血引起的腦血管收縮，交感調節的影響SUSPENDEDNCT07095751人工智能協助的Uro-Cam導尿管評估系統，用於診斷膀胱癌NOT_YET_RECRUITING

其他以 Additive Orthopaedics, LLC 為申請人之記錄

相關紀錄係使用名稱、產品代碼或其他後設資料自動配對。配對結果並不構成已驗證的臨床、科學、企業或監管關係，請查閱連結的官方來源。

K211076病人專屬標記導引K163593增材醫學腳趾畸形系統K170214增材醫學固定網格板K153207增材醫學骨科骨楔系統K160264增材醫學槌狀趾矯正系統

相關器械（代碼：HRS）

相關紀錄係使用名稱、產品代碼或其他後設資料自動配對。配對結果並不構成已驗證的臨床、科學、企業或監管關係，請查閱連結的官方來源。

K261892ProRib固定系統Costa Surgical, Inc.K262098EnHAnce PEEK 趾骨隆起系統Nvision Biomedical TechnologiesK262963TMC 偽骨固定系統Treace Medical Concepts, Inc.K261647Tempo植板系統；超壓縮螺釘系統Pace SurgicalK261830FRAXION 3.5 板系統（多種 - 見目錄）；FRAXION 4.5 板系統（多種 - 見目錄）；FRAXION Mini 板系統（多種 - 見目錄）；FRAXION 骨釘系統（多種 - 見目錄）Ortler Global Tibbi Gerecler Anonim SirketiK262537Versalock 無菌板片系統GM Dos Reis Industria e Comercio Ltda.

官方來源

在 FDA 資料庫中查看 →

資料來源為 FDA Open API。如需最新且權威的資訊，請始終參閱官方記錄。

↑