免責聲明: 本站彙整 FDA、ClinicalTrials.gov、PubMed、SEC EDGAR 等官方公開資料，僅供一般參考，不構成醫療建議、診斷、治療建議或投資建議。

FDA 510(k)

MiRus 3D打印腰椎間融合系統，包括Callisto 3D打印PLIF、HYPERION 3D打印TLIF、CALYPSO 3D打印LLIF以及ANTARES 3D打印ALIF

K 號：K191906 · 2020-05-18

申請人MiRus, LLC
決定日期2020-05-18
產品代碼MAX
諮詢委員會或
決定相當於

器材摘要

MiRus 3D Printed Lumbar Interbody Fusion Systems consisting of the Callisto 3D Printed PLIF, HYPERION 3D Printed TLIF, CALYPSO 3D Printed LLIF, and ANTARES 3D Printed ALIF is the device name listed in this FDA 510(k) record. The listed applicant is MiRus, LLC. It received FDA 510(k) clearance on 2020-05-18 under 510(k) number K191906. The device is classified under product code MAX. It was reviewed by the OR advisory panel. FDA Decision: Substantially Equivalent.

常見問題

What is the MiRus 3D Printed Lumbar Interbody Fusion Systems consisting of the Callisto 3D Printed PLIF, HYPERION 3D Printed TLIF, CALYPSO 3D Printed LLIF, and ANTARES 3D Printed ALIF?

MiRus 3D Printed Lumbar Interbody Fusion Systems consisting of the Callisto 3D Printed PLIF, HYPERION 3D Printed TLIF, CALYPSO 3D Printed LLIF, and ANTARES 3D Printed ALIF is a medical device that received FDA 510(k) clearance on 2020-05-18. The listed applicant is MiRus, LLC. The 510(k) number is K191906.

When did MiRus 3D Printed Lumbar Interbody Fusion Systems consisting of the Callisto 3D Printed PLIF, HYPERION 3D Printed TLIF, CALYPSO 3D Printed LLIF, and ANTARES 3D Printed ALIF receive FDA 510(k) clearance?

MiRus 3D Printed Lumbar Interbody Fusion Systems consisting of the Callisto 3D Printed PLIF, HYPERION 3D Printed TLIF, CALYPSO 3D Printed LLIF, and ANTARES 3D Printed ALIF received FDA 510(k) clearance on 2020-05-18, under 510(k) number K191906.

Who is the listed applicant for MiRus 3D Printed Lumbar Interbody Fusion Systems consisting of the Callisto 3D Printed PLIF, HYPERION 3D Printed TLIF, CALYPSO 3D Printed LLIF, and ANTARES 3D Printed ALIF?

The FDA 510(k) record lists MiRus, LLC as the applicant. This does not by itself establish the device manufacturer.

What is the FDA product code for MiRus 3D Printed Lumbar Interbody Fusion Systems consisting of the Callisto 3D Printed PLIF, HYPERION 3D Printed TLIF, CALYPSO 3D Printed LLIF, and ANTARES 3D Printed ALIF?

The FDA product code for MiRus 3D Printed Lumbar Interbody Fusion Systems consisting of the Callisto 3D Printed PLIF, HYPERION 3D Printed TLIF, CALYPSO 3D Printed LLIF, and ANTARES 3D Printed ALIF is MAX.

相關臨床試驗

相關紀錄係使用名稱、產品代碼或其他後設資料自動配對。配對結果並不構成已驗證的臨床、科學、企業或監管關係，請查閱連結的官方來源。

NCT07608549FLASH 預試階段 1 安全性研究NOT_YET_RECRUITINGNCT06562205PAP系統外部臨床研究（ECS）NOT_YET_RECRUITINGNCT06443177對於動脈瘤性硬腦膜下出血引起的腦血管收縮，交感調節的影響SUSPENDEDNCT07095751人工智能協助的Uro-Cam導尿管評估系統，用於診斷膀胱癌NOT_YET_RECRUITING

其他以 MiRus, LLC 為申請人之記錄

相關紀錄係使用名稱、產品代碼或其他後設資料自動配對。配對結果並不構成已驗證的臨床、科學、企業或監管關係，請查閱連結的官方來源。

K253444EUROPA™ 頸椎後融合導航儀器K252733ATLAS™ Expandable Osteotomy Wedge SystemK242516EUROPA™ 頸椎後融合系統K241175MiRus MoRe 腰椎板系統K232348RIGEL™ 3DR 独立式前方颈椎椎間融合系統K232481RIGEL™ 3DR 頸部前方椎體切除系統

查看所有 24 項裝置 →

相關器械（代碼：MAX）

相關紀錄係使用名稱、產品代碼或其他後設資料自動配對。配對結果並不構成已驗證的臨床、科學、企業或監管關係，請查閱連結的官方來源。

K261049SCALA® TLSpineart SAK261430TruLift可擴展系統Life Spine, Inc.K253011Catalyft PL 可擴展椎間體系統Medtronic Sofamor Danek USA, Inc.K261020Symmetrix™ L脊椎系統Medtronic Sofamor Danek USA, Inc.K253420Admiral ACP System; Explorer TO System; Laminoplasty System; Manta Ray TDF Spacer; Meridian Interbody System; Meridian Anterior Plate System; Reef L Interbody System; Reef TO/TA System; Regatta Lateral System; Regatta Lateral Plate System; Shoreline ACS Interbody System; Shoreline Threaded TruProfile Plate; Shoreline RT Interbody System; Vu Mesh; WaveForm A Interbody System; WaveForm C Interbody System; WaveForm L Interbody System; WaveForm TA Interbody System; WaveForm TO Interbody SystemSeaSpine Orthopedics CorporationK253151Fule間體融合籠架系統Beijing Fule Science & Technology Development Co., Ltd.

官方來源

在 FDA 資料庫中查看 →

資料來源為 FDA Open API。如需最新且權威的資訊，請始終參閱官方記錄。

↑